Aluminum Push LED Torch Lamp

With low power consumption, the Aluminum Push LED Torch Lamp consumes very less amount of electricity compared to custom CFL tubes and lights. It also offers long service life without compromising lighting quality.

LED Torch

1,Front Glass:yes
2,torch Colour: Silver
3,lifetime :50000 hours
4,Waterproof: NO

Aluminum Push LED Torch Lamp

 Style: Bike Light
Lamp Type: LED
Torch Colour: Aluminum
No. of LEDs: 9
Body: Aluminum
Switch Type: Push
Rechargeable Battery: No
Battery Type: R03/AAA/Mini Penlite/Micro
No. of Batteries: 3
Front Glass: Yes
Waterproof: Splash Water Resistance

 

Advantage
  High energy : saving energy is pollution-free environment . DC drive , ultra-low power consumption (single tube 0.03-0.06 W ) electro-optical power conversion close to 100% , the same lighting effects than traditional energy sources more than 80% .

 

 

Long life: LED light source that some people call long life lamps, which means the light never goes out . Solid cold light source , epoxy resin, light body and no loose parts , there is no filament light easy to burn , heat deposition , the light fades and other shortcomings , the service life of up to 60,000 to 100,000 hours , longer life than conventional light sources 10 times or more

 

 

Many changes : LED light source can be used red, green , blue trichromatic principle , under the control of the computer technology to make three colors with 256 levels of gray , and any mix can produce 256 × 256 × 256 = 16777216 colors , the formation of different light changing the color combination , to achieve a variety of dynamic changes and various image effects .

 

 

Environmental benefits : Environmental benefits of better , no ultraviolet and infrared spectra , neither heat nor radiation, glare is small, and recyclable waste, no pollution, no mercury elements , cold light source , safe touch , typical of the green light source .

 

High-tech tip : with the traditional light source compared to the monotonous glow , LED lighting is low voltage microelectronic products , the successful integration of computer technology , network communications technology , image processing , embedded control technology, so it is also digital information products , is semiconductor optoelectronic devices , " high point " technology , with online programming, unlimited scalability , flexible features .

LED flashlight is a light-emitting diodes as a light source of a new lighting tool , it has a power-saving , durable , strong brightness , etc.

 

Buy a good LED flashlight should note the following points:
  1 , the first few moderate . Household generally not more than 12 , use the battery in 2 to 3 as well, and then a little big waves , for other special needs may need ourselves .
  2 , welding to prison . Each diode is connected to the circuit board by soldering , if Weld a bad contact, it may cause bulb does not light or affect the overall use .

3, the electric condenser surface as beads on one point . This flashlight unlike ordinary flashlight can adjust the focus , to look out not to have astigmatism .
  4 , the power switch contacts to be obvious. This multi- use rotary switch flashlight , tighten it to open , then loosen it off , if the contact is not obvious , is likely to result when the light off when the phenomenon .
  5 , pay attention to water . Because it is electronic , the front has a flashlight circuit board , once the water prone to short-circuit , causing damage.